Browse all practice questions for the Certified Water Technologist (CWT) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Certified Water Technologist (CWT) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the proper location for the continuous boiler blowdown takeoff?
  • Which federal agency is tasked with enforcing MSDS regulations?
  • Given a water with a pH of 8.3 and a Langelier pH of saturation of 6.5, what is the Ryznar Index?
  • Ter-polymers used in cooling water treatment are generally not compatible with which type of biocide?
  • What is the purpose of a water quality index?
  • What is the maximum ABMA TDS limit for low pressure boilers (less than 300 psi)?
  • What is the "normal" bed depth in a cation ion exchange softener?
  • What is the optimal range of cycles for cooling tower water to minimize blowdown?
  • Which of the following is a consequence of high levels of bacterial regrowth in stored water?
  • What is the primary role of a Certified Water Technologist (CWT)?
  • Why is monitoring water quality important?
  • What is the primary function of a chlorinator in a water treatment facility?
  • What is the acceptable range for metal corrosion inhibition in a cooling water treatment program?
  • In a cooling tower, what is the typical evaporation factor related to temperature change?
  • A coordinated phosphate-pH treatment is typically utilized in which type of systems?
  • Why is the process of softener regeneration important in water treatment?
  • What is the significance of monitoring pH levels in water treatment?
  • Micro-organisms that cling to pipe surfaces are referred to as?
  • What does chlorine residual refer to in water treatment?
  • Which factor is essential in determining the flow rate of water in a cooling tower?
  • Which type of cooling system typically benefits from regular water treatment programs?
  • What should be the focus of continuing education for water treatment professionals?
  • What is a common method for disinfecting drinking water?
  • In water treatment, what is the purpose of the backwash process?
  • How much resin will a customer need to replace in a monoplex softener with an inside diameter of 30 inches and a bed depth of 40 inches?
  • If a pump operates only 50% of the time, what should be the delivery in ml/min for a desired chemical feed rate of 15 gallons per day?
  • How does biological filtration benefit water treatment processes?
  • What is a common consequence of elevated levels of fluoride in drinking water?
  • Which of the following is a typical effect of chlorine exposure?
  • What is an essential factor in the labeling of chemical containers in the workplace?
  • What is the most economical method for removing dissolved gases from boiler feedwater?
  • What can be a consequence of low oxygen solubility in water?
  • What is a common consequence of operating cooling systems without proper corrosion inhibitors?
  • Which two processes are commonly used in water treatment?
  • Which element is commonly recognized as an indicator of heavy metal contamination in water?
  • Which test is commonly used to assess water hardness?
  • What is the primary mechanism by which a cooling tower operates?
  • In what type of water are biological contaminants most commonly found?
  • What chemical is frequently used to prevent scale formation in water systems?
  • What is a key function of the Environmental Protection Agency (EPA)?
  • Which process helps to remove larger particles from water before filtration?
  • What does the term "influent" refer to in the context of water treatment?
  • What is the per cent blowdown if there are 10 ppm of chloride in the feedwater and 200 ppm in the boiler blowdown water?
  • Which organization is responsible for regulating water quality standards?
  • What is the ideal pH range for neutralizing amines to minimize corrosion in steam condensate?
  • What measurement is used to express the rate of metal corrosion in cooling water treatment?
  • How does temperature affect the solubility of oxygen in water?
  • What is the role of a flow meter in a water treatment plant?
  • Which of the following is a key component of Employee Chemical Safety training?
  • What is the purpose of disinfection in water treatment?
  • In cooling systems, what does the term 'sensible heat' refer to?
  • Cooling tower evaporation is approximately what percentage of the circulation rate for every 10 F temperature difference across the tower?
  • Name a potential indicator of waterborne diseases.
  • Which factor is NOT considered in the design of a pot feeder for a chilled water system?
  • What principle underlies carbon adsorption in water treatment?
  • What is the desired salt concentration in a cation exchange softener regenerant?
  • Total hardness of water is primarily a combination of which elements?
  • Which amine is most prone to causing steam line deposits in systems with high CO2 levels?
  • Which component is typically removed through reverse osmosis?
  • If boiler feedwater calcium increases from 1 ppm to 3 ppm, how much additional phosphate treatment will be needed to maintain residual at 30 ppm with 8 cycles?
  • What type of scale is primarily associated with water hardness?
  • What does biomonitoring assess in aquatic ecosystems?
  • What process is used to monitor the quality of water in relation to aquatic life?
  • What is a potential risk of inadequate water treatment?
  • What is the importance of chlorine residual in treated water?
  • What is the best method of disposing of spilled hazardous material?
  • What might be a consequence of using water with high turbidity levels?
  • What is the primary use of a borescope in water technology?
  • How can biological contamination in water be controlled?
  • What is the effect of high levels of organic material in cooling tower water?
  • What is the primary purpose of a water quality monitoring program?
  • What is the typical pH range for drinking water?
  • What is the minimum feedwater sulfite level required when using an economizer?
  • What is the role of a backflow preventer in water systems?
  • Which factor is most important in determining the dosage of water treatment chemicals?
  • Which of the following is a common biocide used in cooling water treatment?
  • What is the common effect of scaling in a cooling tower system?
  • What health risk is associated with lead in drinking water?
  • Why is regular maintenance crucial for water treatment equipment?
  • What is the maximum permissible level of morpholine in steam that may contact food products?
  • What does "absolute" pressure in lbs/in2 refer to?
  • What is a typical symptom of chlorine gas exposure?
  • What is the primary method employed in biological filtration?
  • What is the purpose of a water treatment plant's sedimentation process?
  • What does the term "cross-connection" refer to in water systems?
  • What does "bacterial regrowth" indicate about treated water?
  • What must a written Hazard Communication Program include to be complete?
  • Which water treatment method utilizes ozone for disinfection?
  • In cooling tower systems, what is the primary means of heat removal?
  • What is "chloramines"?
  • What can gel type cation exchange resin be regenerated with?
  • What symptom indicates a severe reaction to chlorine gas?
  • What is the total system volume in gallons for a cooling tower basin that is 15' wide, 12' long, with a water depth of 16 inches and 160 linear feet of 8 inch diameter piping?
  • What does the acronym "EPA" represent?
  • What does CAS stand for in the context of chemical identification?
  • If a chemical pump is feeding 30 ml/min and operates 5 minutes out of every hour, how long will a 30-gallon drum last?
  • What is an aquifer?
  • What does "channeling" result from?
  • What is the primary function of a water softener?
  • How is total dissolved solids (TDS) defined?
  • For efficient operation, what temperature should the storage section of a steam deaerator be maintained at?
  • A cooling water system contains 12,000 gallons of water. How much biocide is needed for a dosage of 25 ppm?
  • What is a "ton" of refrigeration defined as?
  • Which factor greatly influences the effectiveness of cooling tower water treatment?
  • If a cooling tower is circulating 2000 gpm with a ΔT of 8 degrees F, what is the best estimate for the evaporation rate (E) using the provided formula?
  • What type of chemical reaction is necessary for chlorination to effectively disinfect water?
  • What is the desired salt concentration in the brine tank?
  • What is the best choice for the chemical oxygen scavenger addition point?
  • The acronym "HEPA" refers to what?
  • Chloramines are primarily used for what purpose in water systems?
  • Which process can result in the purification of drinking water?
  • When installing a pot feeder in a closed chilled water system in a tall building, what should be the minimum static pressure rating?
  • What is typically the optimal range for pH in cooling water systems?
  • What factor can significantly reduce the efficiency of a cooling tower?
  • What concentration range of salt is generally recommended for regenerating a cation exchange softener?
  • What is typically the effect of biological contaminants in water sources?
  • If a cooling tower evaporates 65 gallons per minute and cycles the makeup water 3.5 times, how much blowdown is required daily?
  • What are the primary steps in softener regeneration?
  • What is the function of sodium nitrate in a standard "recipe" for steam generator boilout compound?
  • When using salt for regeneration of ion exchange resin, what is the typical dosage range?
  • What kind of systems use a chemical feed pump?
  • Which of these is a negative effect of chloramines in water systems?
  • Which parameter is measured by turbidity meters?
  • What is the function of phosphate in water treatment systems?
  • If feedwater hardness increases from 1 ppm to 3 ppm with a chelant treatment, how much increase in chelant treatment will occur after 8 cycles?
  • What is the purpose of using biocides in a cooling water system?
  • What is the purpose of a blowdown in a cooling tower system?
  • What is a primary health concern about nitrates in drinking water?
  • How can you convert temperature from Celsius to Fahrenheit?
  • Chlorine, bromine, and ozone are classified as which of the following?
  • What information does a water quality report typically provide?
  • What does the term 'sessile' refer to in the context of micro-organisms?
  • What chemical is often used to control corrosion in boiler systems?
  • What does MSDS stand for and what information does it provide?
  • What factors are crucial for achieving a microbiological "kill" in a cooling water system?
  • What is one key advantage of membrane filtration?
  • What might be a sign of water contamination from heavy metals?
  • What is the main objective of wastewater treatment?
  • The most common treatment to protect copper and copper alloys in a cooling system is?
  • What is a potential source of lead contamination in water?
  • How many gallons of water are softened per regeneration when 10 pounds of salt per cubic foot is used?
  • What could a high Ryznar Index indicate about water?
  • Given a bottle weighs 0.45 lb empty, 0.84 lb when filled with water, and 0.77 lb with a new product, what is the specific gravity of the new product?
  • In water treatment, what does the process of backwashing do?
  • What are the primary contaminants found in groundwater?
  • What is the approximate level of dissolved oxygen a properly operating steam deaerator can achieve at a minimum?
  • What method is most commonly used to protect cooling systems from corrosion of copper alloys?
  • What is one effect of high turbidity levels in water?
  • What is a critical consideration when selecting a corrosion inhibitor for a cooling system?
  • Which chemical is commonly used to eliminate iron from water?
  • What is the exchange rate of typical sodium ion exchange resin regenerated with 10 lbs of salt per cubic foot?
  • What does turbidity indicate in water treatment?
  • In the NFPA "diamond" label, what does the white square represent?
  • Where is sodium nitrite predominantly used as a corrosion inhibitor?
  • A water quality index primarily helps stakeholders understand what aspect of water?
  • What reaction leads to the formation of chloramines?
  • What is reverse osmosis?
  • Why is it important to manage water resources effectively?
  • What is the function of alum in water treatment?
  • What is the total hardness level of city water being processed in the duplex softener?
  • What is a key goal of disinfection processes in water treatment?
  • What is the function of a chemical oxygen scavenger in water treatment?
  • How is dental fluorosis caused?
  • Why are hardness levels in water important?
  • How can total dissolved solids (TDS) in water supply be accurately measured?
  • Carbon dioxide in steam condensate primarily comes from the breakdown of which substance?
  • The standard reaction between sodium sulfite and oxygen shows that each part of oxygen requires "about" how many parts of sodium sulfite?
  • What is the purpose of a settling basin?
  • Which method is used to assess water quality as indicated by a water quality index?
  • What effect does high water hardness have on household appliances?
  • What is the role of coagulants in water treatment?
  • Who issued the plan for managing pathogenic biological agents in U.S. Healthcare facilities?
  • What role does activated carbon play in water treatment?
  • What is the primary advantage of using UV radiation for water disinfection?
  • What does "contaminated runoff" signify?
  • Which of the following is a common method for removing contaminants from water?
  • What is essential for maintaining the balance of nutrients in a water supply?
  • What is the primary purpose of training employees on the plant labeling system?
  • What is the main function of potassium permanganate in water treatment?
  • How can water quality be ensured in municipal water systems?
  • A positive value of the Langelier saturation index indicates what about the water?
  • In a typical RO application, which membrane type is most commonly encountered?
  • How is "permeability" defined in relation to water treatment?
  • How do primary, secondary, and tertiary water treatments differ?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy